Builder
Builder
| Author | jrbudda |
| Version | 0.2 |
| Citizens build | 2.0.1 dev build #343 |
| Other dependencies | None required. |
| Download | Link |
Description: Citizens NPCs that build schematics.
| |
Builder is a Citizens 2.0 character trait that gives NPCs the ability to:
- Build MCEdit/Worldedit schematics, block by block.
- Rebuild an area, fixing anything that has been changed.
Updates
v. 0.2 Alpha 9/9/2012
- Added commands ignoreair, ignoreliquid, origin, info
v. 0.1.1 Alpha 9/9/2012
- Added Mark command.
- Better pathing.
v. 0.1 Alpha 9/9/2012
- First release
Installation
- Install Citizens 2
- Place Builder.jar file in /plugins directory.
- Place .schematic files in /plugins/Builder/schematics/
- Start Server
- Create NPC and give the Builder trait.
/npc create Bob --trait builder
Permissions
- builder.*
- builder.[name of command]
Commands
/builder load [schematic] - Loads a .schematic file. simply use the name of the schematic. Example
/builder load house
/builder origin - Sets the origin of the builder's projects to the builder's current location. Allows you to re-build in the same spot. If this is not set the builder will always start from his current location.
/builder mark - Places a glowstone block at the 4 corners of the footprint, then returns to the origin, so you can see where it's going to build.
/builder build - Start building the schematic.
/builder cancel - Cancel a build job.
/builder info - View a Builder's loaded schematic name and size, as well as the builder's options.
/builder ignoreair - Toggles the builder to not set air blocks, false by default. Use this to build into existing block structure.
/builder ignoreliquid - Toggles the builder to not set water or lava. Use this if the schematic comes with un-contained liquids.
Usage
- .schematic files should be placed in the /plugins/Builder/schematics/ directory.
- Position the builder, or set the builder's origin, to the center of the footpoint you want to build before calling build. The size of the schematic is shown upon load.
- It is highly recommended to set the Origin before building. This will allow you to cancel the build and restart it later, the builder will pick up where he left off.
- The builder will ignore any empty space underneath the schematic object so that it will always rest on the ground where the builder starts.
- The builder will not attempt to replace blocks that are already set properly, this means you can use a builder to quickly 'restore' any changed blocks in something he has previously built.
Planned Additions
- Rotate/flip schematic before build.
- Economy costs for building.
- Require materials for building.
- More commands for info, area marking.
- Configuration for schematics directory, default options.