Denizen/0.7/Interact Scripts/Commands: Difference between revisions

From Citizens Wiki
Line 234: Line 234:
{{Denizen Command Color 2|mintcream|
{{Denizen Command Color 2|mintcream|
LOOK
LOOK
|LOOK [[DIRECTION]|BOOKMARK:[BOOKMARK_NAME]|[CLOSE|AWAY]] (NPCID:[#]) (DURATION:[#])
|LOOK [DIRECTION or BOOKMARK:BookamrkName or 'BOOKMARK:Denizen Name:BookamrkName' or CLOSE or AWAY] (NPCID:#) (DURATION:#)
| <p>This command controls where the NPC Denizen is looking. It requires either a Direction, Bookmark, or look-close trait state. Valid directions: <tt>UP, DOWN, LEFT, RIGHT, NORTH, SOUTH, EAST, WEST, AT, and BACK</tt>. Looking <tt>AT</tt> or <tt>BACK</tt> takes the Player's position for reference. AT will look at the Player, <tt>BACK</tt> will look away from the player. Using <tt>CLOSE|AWAY</tt> will toggle the NPC's <tt>look-close trait</tt>. <tt>CLOSE</tt> will make the NPC's head follow the closest Player to it. You can toggle off this behavior by using <tt>AWAY</tt>, not to be confused with <tt>BACK</tt>. If you specify a Location Bookmark instead of a direction, the NPC will take the pitch and yaw from the information stored in the bookmark. Note: This does not affect the actual position of the NPC Denizen, only the head position. Using a <tt>DURATION</tt> argument will restore the previous head position after that amount of time. Note: The script queue will continue as normal, so if the NPC moves or uses another LOOK command in this duration, it may get glitchy. Either time your commands appropriately, or use a <tt>WAIT</tt> command to compensate. The optional argument <tt>NPCID</tt> will change the Denizen NPC doing the looking.  
| <p>This command controls where the NPC Denizen is looking. It requires either a Direction, Bookmark, or look-close trait state. Valid directions: <tt>UP, DOWN, LEFT, RIGHT, NORTH, SOUTH, EAST, WEST, AT, and BACK</tt>. Looking <tt>AT</tt> or <tt>BACK</tt> takes the Player's position for reference. AT will look at the Player, <tt>BACK</tt> will look away from the player. Using <tt>CLOSE|AWAY</tt> will toggle the NPC's <tt>look-close trait</tt>. <tt>CLOSE</tt> will make the NPC's head follow the closest Player to it. You can toggle off this behavior by using <tt>AWAY</tt>, not to be confused with <tt>BACK</tt>. If you specify a Location Bookmark instead of a direction, the NPC will take the pitch and yaw from the information stored in the bookmark. Note: This does not affect the actual position of the NPC Denizen, only the head position. Using a <tt>DURATION</tt> argument will restore the previous head position after that amount of time. Note: The script queue will continue as normal, so if the NPC moves or uses another LOOK command in this duration, it may get glitchy. Either time your commands appropriately, or use a <tt>WAIT</tt> command to compensate. The optional argument <tt>NPCID</tt> will change the Denizen NPC doing the looking.  
'''Example Usages'''
'''Example Usages'''

Revision as of 06:05, 21 August 2012

Interact Script Commands are used to make the Denizen perform actions in an Interact Script. They are written in a YAML sequence under the Script node of an Interact Trigger. A single entry in the sequence contains a Command and Modifiers. Some commands have no available modifiers.

Syntax

Syntax is very important for proper execution.

  • Placing a caret ^ in front of the command name causes that command to ignore the normal 0.5 second delay between commands.
  • The command must be upper-case (i.e CHAT not chat)
  • Modifiers are not case sensitive.
  • Modifiers in [Brackets] are required for the command to execute. [A or B] means either A or B is required.
  • Modifiers in (Parentheses) are optional, and generally change the default behavior of the command.
  • Modifiers that take a value are of the form MODIFIER:VALUE.
    • If the VALUE of the modifier contains a space, such as in the case of a NPC or script name, the whole modifier must be put in quotes.
Example: - TELEPORT BOOKMARK:Bob:Bobshouse is okay, but - TELEPORT 'BOOKMARK:Bob Jones:Bobshouse' requires the quotes to function properly.

Example:

Some Trigger:
  Script:
  - COMMAND1 MODIFIER1 MODIFIER2:VALUE
  - COMMAND2 'MODIFIER1:Value With Spaces'
  - ^COMMAND3 'This will run instantly after COMMAND2'

List of Commands

Script Flow

These commands have no external affect on the world, but can control the flow of scripts within Denizen. Though not required, and with the exception of WAIT, it is generally recommended to run these as Instant Commands to ensure smooth Script feedback to players.

Server

The commands below require [Vault] and a valid permissions system.

Speech

These commands show some text to the player interacting, and usually to bystanders around. Text commands also have some auto-formatting, such as making sure no words will be cut off on long messages, and applying color codes. See: Denizen Color Codes. Formatting for how NPCs and Players talk can be customized in the Denizen/config.yml.

  • All Speech commands require quotes (single (' ') or double (" ")) around the text. If your text has an apostrophe (') in it, you MUST use double quotes (" ")!!

You can use the following placeholders to fill in specific information:

  • <NPC> - The Denizens's name.
  • <PLAYER> - The interacting Player's name
  • <DISPLAYNAME> - The interacting Player's display name
  • <HEALTH> - The interacting Player's heath
  • <WORLD> - The name of the Denizen's world

If you use the NOPLAYER modifier on a text command the <PLAYER>, <DISPLAYNAME> and <HEALTH> tags are not available.

Movement

Denizen NPC commands are meant to help bring your Denizen to life by allowing fine-control of small movements. These are not necessarily meant for making the Denizen NPC do large/long activities, those will instead be done by the Activities, which is just now starting to be implemented into Denizen. The next 'large' update will focus on Activities.

World Interaction

Player Interaction