DtlTraders/patterns

From Citizens Wiki

Overview

Every pattern is saved in the patterns.yml file located in the plugin's main folder. (plugins/DtlCitizensTrader)
You can change the directory in the configuration file.


There are 3 types of patterns:

- Pricing patterns
Sets item prices and pricing tiers.

- Item patterns
Will add certain items to the trader's stock.

By using item patterns you can also set two items in the same slot and each can have a different function. An example of this can be found below.

- Market traders
A special pattern used by market traders. It has a different construction so care has to be taken to set it up properly.

Pricing and Item patterns may be mixed so you can create a pricing and items pattern within one pattern.


Pricing patterns

Basics

An example of a basic pricing pattern:

default:

prices: all: multiplier: 1.0 35: 1.5 '35:2': 2.0 sell: 1: 0.33 2: 0.66 3: 0.99 buy: multiplier: 0.9 1: 0.33 2: 0.66 3: 0.99

In the all section you can set item price for both buying and selling. To change the item's value depending on the transaction type you can use the sell and buy sections.

The multiplier is used to quickly change prices. By using this setting you can adjust prices on the server scale just by setting a single number. You could for example lower the value of any offered item by setting multiplier to 0.9 - every price would then be reduced by 10%. When no multiplier is set the value defaults to 1.0.

Multipliers set in the sell or buy sections have higher priority than those set in the all section. In the above example 0.9 set in the buy block overrides 1.0 set in the all section.

When dealing with blocks that use additional data value such as colored wool keep in mind that you can, for example, set the price of any wool by using 35: <price>. Changing that line to '35:0': <price> would only apply to white wool. Moreover if you set the general price for wool (35: <price1>) and then assign a different price to the white wool ('35:0': <price2>) then the more specific assignment has priority. In this case every wool block would cost <price1> with the exception of white wool which would be set to <price2>.

Tiers

Tiers allow you to define multiple patterns and apply them automatically depending on the user's permissions. Each tier can have a different multiplier and/or item prices. Tiers cannot be set for item patterns!

For example creating two tiers - tier1 with sell multiplier set to 0.9, and tier2 with sell multiplier set to 0.8 will have the following effect:


  • players without any permission would see all prices by default with default multipliers
  • players with the permission dtl.trader.tiers.tier1 will have overridden only those prices you got in tier 1
  • players with the permission dtl.trader.tiers.tier2 will have overridden only those prices you got in tier 2
  • players with both permissions will have overridden first all prices from tier 1 and the from tier 2
  • multipliers are always overridden, so when the default multiplier is set to 1.2 and non is set for a tier the multiplier will be set to 1.0 because it's default always for each tier/pattern


Tiers are defined after the pattern and have exactly the same structure.

default: prices: all: multiplier: 1.0 35: 1.5 '35:2': 2.0 sell: 1: 0.33 2: 0.66 3: 0.99 buy: multiplier: 0.9 1: 0.33 2: 0.66 3: 0.99 tier1: all: multiplier: 0.9 sell: 2: 0.11 buy: multiplier: 1.1

Item patterns

Item patterns are used to set up really fast and easily traders, they might be mixed with pricing patterns allowing to create a really nice system, also working now on setting multiple patterns to one trader, so you can set prices within one pattern and items for many traders within another :)

Item syntax

This sound horrible, I know, but it's best way to explain it in two words :D

Every item within a pattern is build up by some keywords and flags you may use, many options you can't achieve with a basic trader setup are here allowed, but you need to be carefully.

Keywords

Item setting

Keyword

Description

Example

Item amounts

a

Sets the amounts for that item, if specified more than one it will use the multiple items window, default: 1

a:1,2,4

Durability

d

Sets the items durability, default: 0

d:22

Price

p

Sets the price for the item, default: pattern price

p:12.22

Slot

s

Sets the slot for the item, default: first empty

s:22

Enchants

e

Sets enchantments for an item, default: none

e:16/3,17/30

Global limits

gl

Sets a global limit for that item, default: no limit

gl:0/30/3600

Player limits

pl

Sets a per player limit for that item, default: no limit

pl:0/30/3600

Stored enchants

se

Sets one one enchant for a enchanted book item, default: none

se:16/7

Name

n

Sets the name for an item, (white space char is replaced with [&]), default: none

n:Item[&]Name

Stack price flag

sp

Sets a flag if the price should be set for the whole stack, when set, amounts will use only the first amount, default: disabled

sp

Simple pattern example

default: inherits: - global_prices items: all: - 35:1 a:1,2,4 s:-1 - 35:2 a:1,2,4 s:-1 - 35:3 a:1 s:-1 - 35:4 a:2 s:-1 p:11 - 1 a:32 s:8 - 2 a:32,54 s:17 buy: - 5 p:5 s:-1 a:18 - 35:0 s:-1 a:8,4,2,1

Notes

The all, sell and buy sections, behaves like for price patterns.

Keywords might be set up in any order, so you may write

- 2 s:17 a:32,54

or

- 2 a:32,54 s:17

it's still the same.

If you set an item with the same id and data like in the pattern, it wont add the item from the pattern, however you may set multiple items with the same id and data in the pattern.

More examples

Durability trick

default: inherits: - global_prices items: buy: - 271 d:32 p:10 s:0 a:1 - 271 d:22 p:50 s:0 a:1 - 271 d:11 p:100 s:0 a:1

You may set different prices depending on the durability loss of an item. The trick is to set each item on the same slot, starting with the most damaged one.

Anything that is more damaged that than the first can't be sold to the trader.

Important is to set the price for each item by yourself, because there is no way to set different prices for damaged items.

Grouping items for sell

default: inherits: - global_prices prices: buy: '35':13 items: buy: - 17 s:0 a:2 sp - 17:1 s:0 a:2 sp - 17:2 s:0 a:2 sp - 17:3 s:0 a:2 sp

This setup will set all 4 Log types into one slot, and this might be considered as a "Log group", the price is determined here in the prices section.

Because we have set for those items amount 2, and the Stackprice flag, people can sell only a minimum of 2 logs to that trader, and will get for 2 logs 13$.

Without Stackprice the price would be multiplied by the amount, so 13$ * 2 = 26$ for 2 logs.

Moreover, we got here inherited global_prices pattern, but when we set up a price within this pattern it will override the inherited price.


Market patterns

Market patterns are from up now not hard to to setup, mainly there are only two requirements to make a Market trader working in the right way.

  1. If you set items, you set only items the trader will buy, because it the trader buys an item from a player, that item will be available for sell to another player.
  2. Because items that was bought needs a price it's needed to always set the prices => sell section with prices for items the trader may buy.

How you set prices for items he buys, it's your thing, you just need to remember about those two things.

Example

default: inherits: - global_prices items: buy: - 17 a:2 sp - 5 a:2 sp - 3 a:2 sp - 35 a:2 sp

Such a pattern will cause to sell to the trader always 2 items.

So those 2 items will appear in the sell section after they are sold :)


Navigation

DtlTraders
Configuration Commands | Permissions
Usage Patterns
Types